HR Container Service

Used 10Ft Cut Down Container

Used 10Ft Cut Down Container

$2,197.25

A used 10ft cut-down container created by shortening a standard ISO box, giving ground-level storage where a full 20ft unit will not fit. Steel construction throughout, double doors, fabricated rear end and lockbox, resprayed inside and out before dispatch.

SKU: SHIP-10FT-USED-034 Categories: , Tag:

In Stock

$400 Flat-Rate Freight Shipping

Order Handling:
3 – 5 Business Days
Delivery Time:
7 – 14 Business Days

Delivered across the continental US from our yard in Lehi, Utah. 30-day return policy on standard containers.

Flat rate applies to standard containers in the continental US. Alaska, Hawaii, remote or restricted-access sites may incur additional charges, shown before checkout.

Accepted Payment Methods

  • Visa
  • Mastercard
  • AMEX
  • Wire Transfer

Used 10ft Cut-Down Container

A cut-down container is exactly what it sounds like: a full-length ISO box shortened to a working size and re-ended. Typically a 40ft shell yields four 10ft units, and because the raw material is an ex-shipping-line container the cost per unit is well below a purpose-built 10ft box.

The rear end is fabricated new — corner posts and panels welded up and finished — and the whole unit is prepared and resprayed inside and out before it leaves us, so it arrives looking considerably better than the donor container did. Original double doors and a fitted lockbox carry over from the shipping end.

One thing to be clear about: a cut-down container cannot be used for shipping. Cutting the shell voids the CSC plate, so this is a static storage unit only. If you need a short container that still carries certification for freight, the 10ft one-trip is the unit to buy instead. We can also cut to lengths other than 10ft — tell us the dimension you need.

Specifications

External Length2.99 m (9 ft 10 in)
External Width2.44 m (8 ft 0 in)
External Height2.59 m (8 ft 6 in)
Internal Length2.84 m (9 ft 4 in)
Internal Width2.35 m (7 ft 9 in)
Internal Height2.39 m (7 ft 10 in)
Door Width2.34 m (7 ft 8 in)
Door Height2.28 m (7 ft 6 in)
Weight1300 kg (2,866 lb)
Floor Type28mm Marine Ply

Build and finish

  • Ex-shipping-line container professionally shortened to length
  • Cut to your exact length requirement on request
  • Fabricated rear panels and corner posts
  • Original double doors retained, with a fitted lockbox
  • Prepared and resprayed inside and out before dispatch
  • Steel construction throughout
  • 28 mm (1.1 in) marine plywood floor
  • Not usable for shipping — cutting the shell voids the CSC plate
  • Covered by our standard 12-month warranty

WHERE A 10FT CUT DOWN CONTAINER MAKES SENSE

A cut down box suits sites where a full-length container will not fit or is not needed: narrow yards, allotments, school grounds, tight residential driveways and rooftop or courtyard compounds. Because the unit is short and comparatively light, it is far easier to place and to move again later than a 20ft or 40ft box.

Looking at other short units? The 10ft cut down used container is the closest alternative, while the 10ft one-trip shipping container is a factory-fresh option if appearance matters. Need something in between? The 30ft cut down one-trip container is built the same way at a longer length.

Browse comparable units in the storage container range, and read the container buyer’s guide for advice on siting, ground preparation and access before you order.

Container Color

Container Condition

Container Size

Reviews

There are no reviews yet.

Be the first to review “Used 10Ft Cut Down Container”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top